4
Mechanical installation
Required tools and resources
Operating Instructions – MOVIMOT
®
flexible
30
4.2 Required tools and resources
• Set of wrenches, set of screwdrivers, set of socket wrenches
• Torque wrench
• Mounting device
• Compensation elements (washers and spacing rings), if necessary
• Fasteners for output elements
• Standard parts are not included in the delivery
4.3 Tolerances for torque ratings
The specified torques must be adhered to with a tolerance of +/-10%.
4.4 Installation requirements
Check that the following conditions have been met:
• The information on the nameplate of the device corresponds to the line voltage.
• The device is undamaged (no damage caused by transport or storage).
• The ambient temperature corresponds to the operating instructions and name-
plate.
• The device must not be installed in the following ambient conditions:
– Potentially explosive atmosphere
– Oils
– Acids
– Gases
– Vapors
– Radiation
• For special designs: The device is designed in accordance with the actual ambient
conditions.
29129451/EN – 12/2019
To Next Page
Loading...
