SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series User Manual

5
Electrical installation
Bulk cables
Operating Instructions – MOVIMOT
®
flexible
65
Connection of bulk cables
The following table shows the conductor assignment of cables with the following part
numbers:
Part numbers
19150067, 19150075
Connection description
Bulk cable Motor connection depending on brake control
Without brake 3-wire brake
AC110 - 500V
2-wire brake
DC24V
(BE/BZ brake) (BK/BP brake)
Core color/
Core cross
section
Identific-
ation
Signal Description
Black
1.5mm
2
2.5mm
2
U/L1 U Motor connection, phase U
Black
1.5mm
2
2.5mm
2
V/L2 V Motor connection, phase V
Black
1.5mm
2
2.5mm
2
W/L3 W Motor connection, phase W
Green/yel-
low
1.5mm
2
2.5mm
2
– PE PE connection
Black
1.0mm
2
1 Brake 13 Reserved
1)
Brake 13 Brake+
Black
1.0mm
2
2 Brake 14 Reserved
1)
Brake 14 Reserved
1)
Black
1.0mm
2
3 Brake 15 Reserved
1)
Brake 15
Brake-
Black
0.75mm
2
4 Temp+ Temperature sensor+ connection
Black
0.75mm
2
5
Temp- Temperature sensor connection-
1) Reserved wires must be isolated and fixed in the wiring space.
29129451/EN – 12/2019

SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series Specifications

General

Brand	SEW-Eurodrive
Model	MOVIMOT flexible MMF1 C/DBC Series
Category	DC Drives
Language	English