55
Before Using the Handset
Bluetooth (
☞
P. 173 “Bluetooth
®
function”)
: Connection stand-by
: Connected
: Measuring location information via GPS (
☞
P. 155
“Location”)
Answering memo (
☞
P. 81 “Voice/Answering memo”)
: No answering memo when the answering memo is set
: One to nine answering memos when the answering memo is
set
: 10 answering memos when the answering memo is set
* The signal strength icon appears with [
] superimposed like
[
]/[ ] while you connect to an access point which is not
connected to the Internet.
Using the status panel
1
Drag the status bar down with your two fingers
at the same time
z
Drag the status bar down with a fingers to display reduced
display area with function buttons etc.
2
Use the status panel
1 Network operator
z
Connected network operator is displayed.
2 Brightness adjust bar
z
Drag it to adjust the brightness of the screen.
To Next Page
Loading...
