104
• GT1 ON X (Use the selective entry)
YES: Print GT1 on the X report.
NO: Not to print GT1 on the X report.
• GT2 ON X (Use the selective entry)
YES: Print GT2 on the X report.
NO: Not to print GT2 on the X report.
• GT3 ON X (Use the selective entry)
YES: Print GT3 on the X report.
NO: Not to print GT3 on the X report.
• TR GT ON X (Use the selective entry)
YES: Print the training GT on the X report.
NO: Not to print the training GT on the X report.
• VD MODE ON X1Z1 (Use the selective entry)
YES: Print total of VOID MODE on X1Z1 report
NO: Not to print total of VOID MODE on X1Z1 report
• VD MODE ON X2Z2 (Use the selective entry)
YES: Print total of VOID MODE on X2Z2 report
NO: Not to print total of VOID MODE on X2Z2 report
• PLU/EAN DATA ON Z (Use the selective entry)
YES: Print PLU/EAN data on the PLU/EAN Z report.
NO: Not to print PLU/EAN data on the PLU/EAN Z report.
• EJ DATA ON Z (Use the selective entry)
YES: Print EJ data on the EJ Z report.
NO: Not to print EJ data on the EJ Z report.
• JOURNAL SIZE (Use the selective entry)
SMALL: Print journal in a small size.
NORMAL: Print journal in a normal size.
■
Z Counter
Procedure
GENERAL Z1: Max.4 digits (0000 to 9999)
GENERAL Z2: Max.4 digits (0000 to 9999)
To Next Page
Loading...
