65
How to Program Alphanumeric Characters
This section discusses how to program alphanumeric characters for various texts.
■
Mobile phone method
Entering alphanumeric characters
To enter a character, simply press a corresponding character key on the programming keyboard.
To enter “A”, press the “8” key.
To enter “B”, press the “8” key twice.
To enter “C”, press the “8” key three times.
Entering double-size characters
W
: This key toggles the double-size character mode and the normal-size character mode. The default
is the normal-size character mode. When the double-size character mode is selected, the letter “W”
appears at the bottom of the display.
Entering upper-case letters
H
: You can enter an upper-case letter by using this key. Press this key just before you enter the upper-
case letter. You should press this key each time you enter an upper-case letter.
: You can lock the upper-case letter mode once the this key is pressed.
Entering space
S
: Enter a space in the cursor position.
To move the cursor
:
;
: Moves the cursor.
To delete a character or gure
D
: Deletes a character or gure in the cursor position.
To change the text input mode
: This key toggles the text input mode, Alphabet (A), European character (Ä), numeric (1), and
symbol (
).
To Next Page
Loading...
