Sharp XE-A307 - CID (Cash in Drawer); CHK;CG (Check Change)

79
■
PO
You can program an upper limit amount and description for paid-out key.
Procedure
Program each item as follows:
• HALO (High Amount Lockout) (Use the numeric entry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99
NOTE
In the initial programming, the HALO function is
programmed as "INVALID".
• TEXT (Use the character entry)
Description for the paid-out key. Up to 12 characters can be
entered.
■
CID (Cash in drawer)
You can program the description and the upper limit amounts for cash in drawer (sentinel).
Procedure
Program each item as follows:
• HALO (High Amount Lockout) (Use the numeric entry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 99999999.99
NOTE
• In the initial programming, the HALO function is
programmed as "INVALID".
• When the cash in drawer amounts exceeds a limit
amount, the sentinel mark (X) will be displayed.
• TEXT (Use the character entry)
Description for the cash in drawer. Up to 12 characters can be
entered.
■
CHK/CG (Check change)
You can program the description and the upper limit amounts for check change.
Procedure
Program each item as follows:
• HALO (High Amount Lockout) (Use the numeric entry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99
NOTE
In the initial programming, the HALO function is
programmed as "INVALID".
• TEXT (Use the character entry)
Description for check change. Up to 12 characters can be
entered.