Sharp XE-A307 - Reading of Stored Programs; Program Reading Sequence

114
Reading of Stored Programs
You can read programs stored in the PGM mode.
■
Program reading sequence
To read those programs stored in the PGM mode, use the following procedure:
1. Select the PGM mode from the mode selection window.
2. Select “1 READING” from the PGM mode to display the items list, and press the
A
key.
Select an item listed in the table shown later.
Item: Description:
1 DEPARTMENT Department
2 PLU/EAN PLU/EAN
1 RANGE (Full or specied range) *
2 PICK UP (By picking list) *
3 EAN OTHERS EAN delete, Non-PLU
3 FUNCTIONS Function
4 MEDIA Media
5 FUNCTION TEXT Function Text
6 CLERK Clerk
7 MANAGER Manager
8 MODE PASS CODE Mode pass code
9 TRAINING CLK Training clerk
10 OPTIONAL Optional
11 REPORT Report
12 MESSAGE Message
13 DEVICE CONFIG Device cong.
14 TAX Tax
15 AUTO KEY Auto key
16 ROM VERSION ROM version
* The procedure to specify a range or to pick up codes are same as the one in sales report.