Sharp XE-A307 - Key Sequence

113
■
Key Sequence
Procedure
1.
In the SETTING window, select “13 AUTO KEY.”
• The AUTO KEY window will appear.
2.
Select “2 KEY SEQUENCE” by the
A
key.
3.
Select the pertinent Auto key from the key list by the
A
key.
4.
Enter the key operation sequence by any key except the
V
key.
The register allows to program up to 25 keys for each AUTO
key.
5.
To terminate the procedure enter the
V
key, the
conrmation window will appear for sequence data saving.
Select “SAVE” or “ABANDON” and enter the
A
key.
Example
In case of the X1 General report printing.
Key operation
m
4=(select X1/Z1 MODE)
A
2=(select READING)
A
1=(select GENERAL)
V
A