62
9
Non-accessed EAN Deletion
Yon can delete EANs that had not been accessed for a certain period. You can program a period in the PGM
mode.
Follow the procedure shown below.
Non-accessed EAN deletion
1. Select the X1/Z1 mode from the mode selection screen.
2. Select "4 EAN DELETE".
3. Select "1 READING" to take a report, or "2 DELETE" to delete non-accessed EANs.
4. When you select "2 DELETE", select you want to delete all the non-accessed EANs (1 ALL
DELETE) or delete the non-accessed EANs individually (2 IND.DELETE).
NOTE
It is recommended to take a report rst before executing deletion operation.
■
Non-accessed EAN report
*1 When you select "DELETE", "Z1" is printed instead of "X1".
*2 When there is any sales data of the EAN for PLU/EAN report, the data is printed here.
When you delete the EAN in Z1 mode under this situation, the EAN data for PLU/EAN report is also
deleted.
*2
EAN code
Description
*1
To Next Page
Loading...
