11(107)
● Adopted Ethernet communication function to realize central monitoring
online.
2) Accessory option
● Water manifolds and Teflon hose are optional.
● Water-removing function of air blowing is optional for STM-W standard
machine.
● All models can opt for magnetic pump except for STM-3650W series.
● Displays of mold temperature and return water temperature of mold are
optional.
All service work should be carried out by a person with technical training or
corresponding professional experience. The manual contains instructions for both
handling and servicing. Chapter 6, which contains service instructions intended for
service engineers. Other chapters contain instructions for the daily operator.
Any modifications of the machine must be approved by SHINI in order to avoid
personal injury and damage to machine. We shall not be liable for any damage
caused by unauthorized change of the machine.
Our company provides excellent after-sales service. Should you have any problem
during using the machine, please contact the company or the local vendor.
Headquarter and Taipei factory：
Tel: (886) 2 2680 9119
Shini Plastics Technologies (Dongguan), Inc：
Tel: (86) 769 8111 6600
Shini Plastics Technologies India Pvt.Ltd.：
Tel: (91) 250 3021 166
To Next Page
Loading...
Need help?
General
