89(107)
OUTPUT MODE——heating or cooling control
SUB HEATING——0 (only 1 group of heater)
5 (two or more groups of heater)
COOLING TEMP.——35
Picture 4-7: Output Setting
9) Press MENU key to return to menu screen, then press◄/► keys to select
temp.setting, press SET key to enter setting screen, see picture below.
H. LIMIT TEMP.——based on actual operation.
L. LIMIT TEMP.——based on actual operation.
TEMP. UNIT—— (C℃ elsius and Fahrenheit)
TEMP. DEGREE——0.1
CTR TEMP BIAS——based on actual operation.
RET TEMP BIAS——based on actual operation
ENT TEMP BIAS——based on actual operation
To Next Page
Loading...
Need help?
General
