17(107)
of the unit would be affected.
7) If the setting temperature is below 100℃, then the pressure switch setting
value should be 1.5-2 bar; If the setting temperature sets between 100℃ and
200℃, then the recommendable pressure switch setting value should be 2.8
bar. If the cooling water pressure is too low, then the pressure switch setting
value can be adjusted properly to ensure normal running. However, it may
affect the limitation of setting temperature or cause unstable temperature
control.
8) Please connect the coolng water outlet with high temperature resistant pipe
when temperature is above 100℃.
1.5 Exemption Clause
The following statements clarify the responsibilities and regulations born by any
buyer or user who purchases products and accessories from Shini (including
employees and agents).
Shini is exempted from liability for any costs, fees, claims and losses caused by
reasons below:
1. Any careless or man-made installations, operation and maintenances upon
machines without referring to the Manual prior to machine using.
2. Any incidents beyond human reasonable controls, which include man-made
vicious or deliberate damages or abnormal power, and machine faults caused
by irresistible natural disasters including fire, flood, storm and earthquake.
3. Any operational actions that are not authorized by Shini upon machine,
including adding or replacing accessories, dismantling, delivering or repairing.
4. Employing consumables or oil media that are not appointed by Shini.
To Next Page
Loading...
Need help?
General
