Shinko DCL-33A - Heater Burnout Alarm Action; Burnout Alarm Indicator and Logic; Alarm Action Types; High and Low Limit Alarms

32
OFF
ON
SV SV
OFF
ON
OFF
ON
OFF
ON
OFF
ON
SV
SV
OFF
ON
High limit alarm
Low limit alarm
High/Low limit range alarm
High/Low limit range independent alarm
High/Low limits alarm High/Low limits independent alarm
Alarm
action
Alarm
output
Alarm
action
Alarm
output
Alarm
action
Alarm
output
EV1 value
SV
+side
- side
+side
- side
SV
EV1 value
EV1 value EV1 value
EV1 hysteresisEV1 hysteresis
EV1 hysteresis EV1 hysteresis
-EV1 value +EV1 value -EV1 value +EV 1 value
EV1 hysteresis
EV1 hysteresis
EV1 low limit value EV1 high limit value
EV1 high limit value
EV1 low limit value
8.3 Heater Burnout Alarm Action
: Event output EV terminals 8 and 9 are ON.
: Event output EV terminals 8 and 9 are OFF.
The Event output EVT indicator lights when Event output EV terminals 8 and 9 are ON,
and goes off when they are OFF.
8.4 Alarm Action
Heater burnout
alarm action
ON
OFF
Heater burnout alarm value
Load current
LargeSmall
Indicator
UnlitLit
(EVT) Red