Software Installation, Management, and Security
Accessing the Web Application
The Shure Web Server Discovery application finds all Shure devices on the network that feature a web-based GUI. Follow these steps to install the software
and access the web application:
① Install the Shure Discovery application
Download and install the Shure Discovery application from www.shure.com. This automatically installs the required Bonjour device discovery tool on the com-
puter.
② Connect the network
Ensure the computer and the hardware are on the same network.
③ Launch the Discovery application
The app displays all Shure devices that feature a GUI.
④ Identify the hardware
Double-click on a device to open its GUI in a web browser.
⑤ Bookmark the device's web application (recommended)
Bookmark the device's DNS name to access the GUI without the Shure Discovery app.
Web Application Browser Compatibility
The web application is compatible with all HTML5-supported browsers. To ensure the best performance, disabling hardware acceleration and unused plug-ins
is recommended.
Accessing the Web Application without the Discovery App
If the Discovery application is not installed, the web application can be accessed by typing the DNS name into an internet browser. The DNS name is derived
from model of the unit, in combination with the last three bytes (six digits) of the MAC address, and ending in .local.
Format Example: If the MAC address of a unit is 00:0E:DD:AA:BB:CC, then the link is written as follows:
MXA910: http://MXA910-aabbcc.local
Using A Password
All settings are configurable by default. To protect settings with a password, open the Settings menu and select the General tab. In this screen, passwords can
be created or changed.
Once a password has been set, a Read-Only option appears on the log-in screen. In Read-Only mode, device parameters can be viewed, but not edited. Device
identification remains active.
Designer System Configuration Software
Designer System Configuration Software enables integrators and system planners to design accurate audio coverage for installations using multiple Shure
MXA910 Ceiling Array microphones. Accurately model meeting and presentation spaces by importing a floorplan, scaling your room, and positioning devices
around participant areas.
Designer allows you to edit coverage parameters before the microphone is installed: enter the microphone and ceiling height, add channels, and create accurate
coverage areas. After completing your design, simply export the device presets to upload and fine-tune on site.
Shure IncorporatedMXA910 Ceiling Array Microphone
27/572017/10/18
To Next Page
Loading...
Need help?
General
