Features
• Design audio coverage for installations using Shure MXA 910 Ceiling Array Microphones
• Add multiple devices to create larger and more complex installations
• Easily export device presets for individual locations or full projects
• Organize installations for multiple rooms, buildings, and clients
• Save time and travel expenses by importing a floorplan and using virtual devices to design your system
• Accurately scale floor plans and reference photos for precise device setup
• Share project files with other Designer users so that multiple people can work on a project
Downloading the Application
Download the application and learn more at www.shure.com/designer.
Firmware Updates
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional
features and enhancements. To take advantage of design improvements, new versions of the firmware can be uploaded and installed using the Shure Update
Utility. Software is available for download from http://www.shure.com.
Important: When components are connected through the Shure MXW Audio Network Interface, their firmware must be updated on one device at a time prior
to updating the MXW Audio Network Interface firmware. Attempting to update all devices at once will cause the interface to reboot after its firmware is updated,
and the connection to other networked components will be lost.
Perform the following steps to update the firmware:
CAUTION! Ensure the device has a stable network connection during the update. Do not turn off the device until the update is complete.
1. Connect the device and computer to the same network (set to the same subnet).
2. Download Shure Update Utility app and install it.
3. Open the application.
Shure IncorporatedMXA910 Ceiling Array Microphone
2017/10/1828/57
To Next Page
Loading...
