4. Click Check For Updates... button to view new firmware versions available for download.
5. Select the desired firmware and press Downloadto download it to the Firmware Library.
6. From the Update Devices tab, select the new firmware and press Send Updates... to begin the firmware update, which overwrites the existing firmware on
the device.
Firmware Release Requirements
All devices comprise a network with multiple communications protocols that work together to ensure proper operation. The recommended best practice is that
all devices are on an identical release. To view the firmware version of each device on the network, open the component user interface, and look under Set-
tings>About.
The format for Shure device’s firmware is MAJOR.MINOR.PATCH. (Ex. 1.6.2 where 1 is the Major firmware level, 6 is the Minor firmware level, and 2 is the
Patch firmware level.) At minimum, devices that operate on the same subnet should have identical MAJOR and MINOR release numbers.
• Devices of different MAJOR releases are not compatible.
• Differences in the PATCH firmware release level may introduce undesired inconsistencies.
Microphone Configuration
Software Overview
Software Workflow
The web application is accessed through a web browser, from a computer on the same network. It allows administrators and technicians to control:
Coverage: Adjust lobe width and location, select templates, save or load presets, customize light bar settings, and run automatic setup.
Channels: Adjust and monitor channel levels, mute channels or channel groups, configure automix settings, and adjust equalizer settings.
Settings: Control network IP settings, device name, passwords, languages, firmware identification, and device reset.
Software Workflow Basics
Think of each lobe as an individual microphone. If there were 8 microphones on the table, each one could be physically moved according to seating arrangements,
and would be plugged into a mixer with independent gain and channel controls. With the Microflex Advance Ceiling Array Microphone, the web application de-
livers control over the physical coverage and audio channel settings, with user presets to quickly switch between configurations. Each lobe is moved according
to seating arrangements, with three width settings to change the size of the coverage area. Independent mixer channels control the level and audio properties
for each lobe.
Shure IncorporatedMXA910 Ceiling Array Microphone
29/572017/10/18
To Next Page
Loading...
