Figure 75: Alignment about the transverse axis
Figure 76: Alignment about the depth axis
b
Af
ter alignment, tighten the screws with the specified tightening torque.
Further topics
•
"Mount
ing using mounting kit 2", page 74
8.3 Switching on
After switching on, the safety laser scanner performs various internal tests. The OFF
LED illumina
tes continually. The ON LED is off.
8 C
OMMISSIONING
124
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/15ZT/2019-11-14 | SICK
Subject to change without notice
To Next Page
Loading...
