SICK microScan3 EtherNet/IP - User Interface; User Groups

Configuring a device offline (device not connected to computer)
If t
he device is not connected to the computer, select it from the device catalog.
You will then configure the device offline. Diagnostics functions are not available.
You can connect the computer to the device later, assign a device to the device tile, and
transfer the configuration to the device.
7.2.3 User interface
Figure 54: Software controls
1
Menu bar
2
Toolbar
3
Main navigation
4
Working range
5
Device catalog
6
Task list and notes
7.2.4 User groups
The devices contain a hierarchy of user groups that regulate access to the devices.
T
he user groups’ settings and passwords are part of the configuration stored in the
device.
For certain actions (e.g., transferring a configuration to the device), you are requested
to log onto the device with the respective user group.
CONFIGURATION 7
8020200/15ZT/2019-11-14 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™
81
Subject to change without notice