•
T
he front is the side of the safety laser scanner on which the display is located.
The 90° angle of the sector of a circle scanned by the safety laser scanner points
in this direction.
•
The back is the side of the safety laser scanner opposite the display. The sector of
a circle not scanned by the safety laser scanner lies in this direction.
3.2.2 Variants
The safety laser scanner is delivered in different variants. You will find an overview of
im
portant distinguishing features of the variants in the following.
Performance package
The Core and Pro performance packages feature a number of configurable fields and a
number of safety switching functions.
•
microScan3 Core – EtherNet/IP™
•
microScan3 Pro – EtherNet/IP™
Integration in the control
T
he safety laser scanner communicates with the machine controller as follows:
•
EtherNet/IP™ – CIP Safety™
Protective field range
T
he safety laser scanner is available in variants with the following maximum protective
field range:
•
4.0 m
•
5.5 m
•
9.0 m
Further topics
•
"Variant overview", page 157
3.2.3 Status indicators
The safety laser scanner outputs important status information using a number of light
emit
ting diodes. The safety laser scanner has a graphical display and 4 pushbuttons for
additional information.
4 status light emitting diodes are located directly above the display.
Figure 5: Status LEDs
3 PRODUCT DESCRIPTION
16
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/15ZT/2019-11-14 | SICK
Subject to change without notice
To Next Page
Loading...
