Table 31: Functional scope of the microScan3 Core – EtherNet/IP™ (devices with a max. protec‐
t
ive field range of 9.0 m)
Version number Amendments and new functions
1.0.0
•
First released version, including the following functions:
°
Improved separation of the checksum from the Safety
Designer version
°
Option to adjust the settings for multiple sampling after
switching between monitoring cases
°
Option to configure behavior on connection termination
°
Data output via UDP and TCP/IP (measurement data, field
interruption, application data, process information)
°
Time synchronization via SNTP
Table 32: Functional scope of the microScan3 Pro – EtherNet/IP™ (devices with a max. protec‐
t
ive field range of 4.0 m and devices with max. protective field range of 5.5 m)
Version number Amendments and new functions
1.0.0
•
F
irst released version, including the following functions:
°
Improved separation of the checksum from the Safety
Designer version
°
Option to adjust the settings for multiple sampling after
switching between monitoring cases
°
Option to configure behavior on connection termination
°
Data output via UDP and TCP/IP (measurement data, field
interruption, application data, process information)
1.1.0
•
Time synchronization via SNTP
Table 33: Functional scope of the microScan3 Pro – EtherNet/IP™ (devices with a max. protec‐
t
ive field range of 9.0 m)
Version number Amendments and new functions
1.0.0
•
F
irst released version, including the following functions:
°
Improved separation of the checksum from the Safety
Designer version
°
Option to adjust the settings for multiple sampling after
switching between monitoring cases
°
Option to configure behavior on connection termination
°
Data output via UDP and TCP/IP (measurement data, field
interruption, application data, process information)
°
Time synchronization via SNTP
Revision
In some c
ases, new system plugs are not suitable for older devices.
The different revision statuses of the devices are identified by “Rev” followed by a
three-digit version number. New devices have a label which indicates the revision sta‐
tus.
New system plugs have a label which indicates the devices for which they are suitable.
Table 34: Compatibility
Label on the device Label on the system plug Compatible
– – Yes
– Only compatible with Rev
≥ 1.1.0
Information is available from
y
our SICK subsidiary.
Rev 1.1.0 – Yes
Rev 1.1.0 Only compatible with Rev
≥ 1.1.0
Yes
Rev 1.2.0 – Yes
13 TECHNICAL DATA
158
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/15ZT/2019-11-14 | SICK
Subject to change without notice
To Next Page
Loading...
