COMMISSIONING 6
8026364 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
▸
Select the device with port number 2111.
▸
Click on Add. The transferred device is displayed in the left-hand window as a tile along
with its default IP address.
NOTE! Where applicable, a message window will appear indicating that the device
driver for the 2D LiDAR sensor is not yet known in the SOPAS project.
▸
Confirm the message with OK.
▸
Click Install device driver in the tile.
▸
To install the device driver, select the Upload from device option.
Transferring a device
to a SOPAS project
Loading device drivers
into the SOPAS project
To Next Page
Loading...