Introduction
1
Note
The following pages contain the Siemens logo and the Siemens legal information.
Please note that since July 1st, 2023 the Siemens Businesses Large Drives Applications
and Low Voltage Motors are part of InnomoticsGmbH, Germany.
All rights to and product information on the following pages have been transferred from
Siemens to Innomotics.
The re-branding of the document will take place in due course.
1.1 About SIMOTICS
Description
SIMOTICS is the Siemens family of electric motors addressing the complete motor spectrum in
Digital Industry.
1.2 About this manual
1.2.1 Content
To illustrate possible application areas for our products, typical use cases are listed in this product
documentation and in the online help. These are purely exemplary and do not constitute a
statement on the suitability of the respective product for applications in specic individual cases.
Unless explicitly contractually agreed, Siemens assumes no liability for such suitability.
Suitability for a particular application in specic individual cases must be assessed by the user,
taking into account all technical, legal, and other requirements on a case-by-case basis. Always
observe the descriptions of the technical properties and the relevant constraints of the
respective product contained in the product documentation.
Description
These Operating Instructions inform you about the motor and its components. You will learn
how to handle the motor properly and safely from delivery to disposal:
• Transporting and storing
• Assembly and mounting
1LE1, 1FP1/3, 1PC1/3 shaft height 63 ... 315
Operating Instructions, 11/2023, A5E38483075A 9
To Next Page
Loading...
Need help?
General