Archive the safety and commissioning notes provided in the scope of delivery as well as
the optionally available operating instructions so that these documents are always easily
accessible.
The rating plate optionally enclosed as a loose item with the delivery is provided to enable
the motor data to be attached on or near the machine or installation.
4.5 Transport and storage
4.5.1 Safety instructions for transport
Comply with the following when carrying out any work on the machine:
• Comply with the general safety instructions (Page15).
• Comply with the applicable national and sector-specic regulations.
• When using the motor within the European Union, comply with the specications laid down
in EN50110‑1 regarding safe operation of electrical equipment.
4.5.1.1 Safety instructions for transport
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
• Machine dimension drawing and the associated explanations or the technical specications
• Transport data
• Rating plate and lifting plate, if available
• Shipping parts list
• Packaging
Danger when incorrectly lifting and transporting
Danger of death, serious injury, or substantial material damage caused by tipping or falling
transported goods. Comply with the following safety instructions:
• All work must be performed with due caution and care.
• Comply with any notes in the shipping papers.
• Carefully comply with all of the handling information and markings on the packages
whenever transporting and putting the equipment into storage according to ISO780.
• Only use suitable and correctly dimensioned lifting equipment, conveying equipment and
transport vehicles.
Preparing for use
4.5Transport and storage
1LE1, 1FP1/3, 1PC1/3 shaft height 63 ... 315
32 Operating Instructions, 11/2023, A5E38483075A
To Next Page
Loading...
Need help?
General