Centrifuge Module Interface Operating Instructions Glossary
092D0001-02 Rev. A page 105
Light tower Vertically stacked colored lights that indicate system
status information. The color of an illuminated light
indicates the operating status of a robot or gate.
• Red indicates a serious error occurred on the
automation system.
The conveyor, robots, and instruments and
modules stop. The operator must take corrective
action.
• Yellow indicates a station is offline.
The conveyor continues to run. The operator
must take corrective action.
• White indicates all stations are online.
The conveyor continues to run. The operator
should take corrective action at the station.
• Green indicates the conveyor is running.
LineMaster Application that allows the operator to control sample
management for the entire automation system.
The LineMaster workspace is the primary point of
interaction between the operator and the automation
system.
LIS Laboratory Information System
Load delay Time in seconds that the Centrifuge module robot
waits between the arrival of a sample tube in the
module and the placement of the cassette containing
it into the Hettich unit. This is dependent on the
availability of the Hettich unit.
Module Connected system, such as the Sample Manager, that
performs sample tube management functions but
does not analyze samples.
Offline Instrument, module, or station is not operational.
Non-robotic interfaces reach the offline state when
the station no longer diverts sample tubes to the side
track.
Robotic interfaces reach the offline state after the
instrument or module checks all safety features and
the robot homes.
Term Definition or Usage
To Next Page
Loading...
