Introduction Centrifuge Module Interface Operating Instructions
page 22 092D0001-02 Rev. A
Diagnostics Screen
The Centrifuge Diagnostics screen displays interface status information,
interface gate information, and a log of interface activities.
Figure 13: Centrifuge Station Diagnostics Screen
Diagnostics Screen Areas
Note The buttons and checkboxes are only user-accessible as described in
the following section.
The Diagnostics screen contains 9 areas or buttons:
• Router Signals area
• Gate Pick Position area
• Gate Place Position area
• Centrifuge Contents area
• Terminate button
• Scale reading area
• Gate calibration area
• Maintenance area
• Log area
Router Signals Area
The system uses the Router Signals checkboxes to display the status of the
sample tube pick and place requests. They are not operator selectable:
• Pick Request When checked, indicates a pick request was made.
To Next Page
Loading...
