7SR210 Instrumentation Guide
Unrestricted ©2018 Siemens Protection Devices Limited Page 11 of 12
1.9. Binary Output Meters
Instrument Description
--------------------
BINARY OUTPUT
METERS
> to view
--------------------
This is the sub-group that includes all the meters that are associated with the
Binary Outputs TEST/RESET ► allows access to this sub-group
BO 1-8 ---- ----
BO 9-16 ----.----
Displays the state of DC binary Outputs 1 to 16. (The number of binary outputs
may vary depending on model)
1.10. Virtual Meters
Instrument Description
--------------------
> to view
--------------------
This is the sub-group that shows the state of the virtual status inputs in the relay
TEST/RESET ► allows access to this sub-group
V 1-8 ---- ----
V 9-16 ---- ----
Displays the state of Virtual Outputs 1 to 16 (The number of virtual inputs will
vary depending on model)
1.11. Communication Meters
Instrument Description
--------------------
COMMUNICATION
> to view
--------------------
This is the sub-group that includes all the meters that are associated with
Communications ports TEST/RESET ► allows access to this sub-group
COM1
COM2
COM3
COM4
Displays which com ports are currently active
COM1 TRAFFIC
Tx1 0
Rx1 0
Rx1 Errors 0
Displays traffic on Com1
COM2 TRAFFIC
Tx2 0
Rx2 0
Rx2 Errors 0
Displays traffic on Com2
COM3 TRAFFIC
Tx3 0
Rx3 0
Rx3 Errors 0
Displays traffic on Com3
COM4 TRAFFIC
Tx4 0
Rx4 0
Rx4 Errors 0
Displays traffic on Com4
To Next Page
Loading...
