Siemens HiPath 3000 Administration Manual

uebersicht.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
1-7
Overview
Administration Interfaces
1.6 Administration Interfaces
You can configure the OpenStage phone by using any of the following methods.
1.6.1 Web-based Management (WBM)
This method employs a web browser for communication with the phone via HTTP or HTTPS. It
is applicable for remote configuration of individual IP phones in your network. Direct access to
the phone is not required.
1.6.2 Deployment Service (DLS)
The Deployment Service (DLS) is a HiPath Management application for administering phones
and soft clients in both HiPath and non-HiPath networks. It has a Java-supported, web-based
user interface, which runs on an internet browser. For further information, please refer to the
Deployment Service Administration Guide.
1.6.3 Local Phone Menu
This method provides direct configuration of an the OpenStage phone. Direct access to the
phone is required.
>
To use this method, the phone must first obtain IP connectivity.
The remote configuration is not applicable while the phone is not in idle mode.
>
As long as the IP connection is not properly configured, you have to use this method
to set up the phone.

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English