Siemens HiPath 3000 Administration Manual

Administration
A31003-S2010-M100-18-76A9
3-50 OpenStage HFA Family, Administration Manual
administration.fm
Mobility (OpenStage 60/80, V1R3 Onwards)
3.7.1 Platform Specific Behaviour
Regarding data mobility, there are some differences, dependent on whether a HiPath 3000 or
HiPath 4000 is in use.
HiPath 4000
When the user logs on to phone B, phone A is in "cancel mobility" state. This means that the
user, or someone else, can trigger a restore of the initial user at phone A. Thus, the user will
be logged off from phone B and logged on at phone A. To prevent an unauthorized person from
doing this, the cancel mobility process can be password-protected. This password is entered in
the Cancel mobility password menu.
HiPath 3000
With this platform, mobility is achieved by storing all user data in the DLS. Hence, for each par-
ticipant who wishes to use data mobility, a mobile user must be created on the DLS. The pro-
cedures are identical to those used for SIP mobility. For details, please refer to the Deployment
Service Administration Manual.
Logon attempts: Trys of unsuccessfull Logon Attempts before the phone switches back from
the Mobile user to Non Mobile user after the connection to the gateway failed.
Settings in "Set Mobility Mode"
OpenStage 60/80
OpenStage 40

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English