Siemens HiPath 3000 - Specific IP Routing

Administration
A31003-S2010-M100-18-76A9
3-20 OpenStage HFA Family, Administration Manual
administration.fm
IP Network Parameters
3.3.5 Specific IP Routing
To have constant access to network subscribers of other domains, you can enter a total of two
more network destinations, in addition to the default route/gateway. This is useful if the LAN has
more than one router or if the LAN is divided into subnets.
Data required
• Route 1/2 IP address: IP address of the selected route.
• Route 1/2 gateway: IP address of the gateway for the selected route.
• Route 1/2 mask: Network mask for the selected route.
Administration via WBM
Network > IP configuration
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- IP Configuration
|--- Route 1 IP
|--- Route 1 gateway
|--- Route 1 mask
|--- Route 2 IP
|--- Route 2 gateway
|
--- Route 2 mask