administration.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
3-53
Administration
Transferring Phone Software, Application and Media Files
3.8.3 Phone Software
The firmware for the phone can be updated by downloading a new software file to the phone.
3.8.3.1 FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see section 3.8.2, “Common FTP Settings”) are to
be used, Use default must be set to "Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• Server: IP address or hostname of the FTP/HTTPS server in use.
• Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
• Account: Account at the server (if applicable).
• Username: User name for accessing the server.
• Password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
7
Do not disconnect the phone from the LAN or power unit during software update. An
active update process is indicated by blinking LEDs and/or in the display.
To Next Page
Loading...
Need help?
General