administration.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
3-23
Administration
IP Network Parameters
3.3.6.3 Terminal Hostname (V2)
With OpenStage firmware V2, the phone’s hostname can be customised. This will only function
if the phone is configured to use DHCP and the DHCP server updates the hostname at the DNS
server.
The corresponding DNS domain is configured in Network > IP configuration > DNS domain
(see section 3.3.6.1, “DNS Domain Name”).
The current DNS name of the phone is displayed at the right-hand side of the banner of the
admin and user web pages, under DNS name. To see configuration changes, the web page
must be reloaded.
The DNS name can be constructed from pre-defined parameters and free text. Its composition
is defined by the DNS name construction parameter. The following options are available:
• "None": No hostname is send to the DHCP server during DHCP configuration.
• "MAC based": The DNS name is built from the prefix "OIP" followed by the phone’s MAC
address.
• "Web name": The DNS name is set to the the string entered in Web name.
• "Only number": The DNS name is set to the Terminal number, that is, the phone’s call
number (E.164).
• "Prefix number": The DNS name is constructed from the the string entered in Web name,
followed by the Terminal number.
Administration via WBM
System > System Identity
Administration via Local Phone
>
It is recommended to inform the user about the DNS name of his/her phone. The
complete WBM address can be found under User menu > Network information >
Web address.
|
--- Administration
|
--- Identity
|--- Web name
|
--- DDNS hostname
To Next Page
Loading...
Need help?
General