EasyManuals Logo

Siemens HiPath 3000 Administration Manual

Siemens HiPath 3000
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Administration
A31003-S2010-M100-18-76A9
3-16 OpenStage HFA Family, Administration Manual
administration.fm
IP Network Parameters
3.3.2 Use DHCP
If this parameter is set to "Yes", the phone will search for a DHCP server on startup and try to
obtain IP data and further configuration parameters from that central server. The default is
"Yes".
If no DHCP server is available in the IP network, please deactivate this option. In this case, the
IP address, subnet mask and default gateway/route must be defined manually.
The following parameters can be obtained by DHCP:
Basic informations
IP Address
Subnet Mask
Optional informations
Default Route (Routers option 3)
IP Routing/Route 1 & 2 (Static Routes option 33)
SNTP IP Address (NTP Server option 42)
Timezone offset (Time Server Offset option 2)
Primary/Secondary IP Addresses (DNS Server option 6)
DNS Domain Name (DNS Domain option 15)
Vendor Unique (option 43)
>
The change will only have effect if you restart the phone.

Table of Contents

Other manuals for Siemens HiPath 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens HiPath 3000 and is the answer not in the manual?

Siemens HiPath 3000 Specifications

General IconGeneral
BrandSiemens
ModelHiPath 3000
CategoryTelephone
LanguageEnglish

Related product manuals