Siemens HiPath 3000 Administration Manual

Administration
A31003-S2010-M100-18-76A9
3-80 OpenStage HFA Family, Administration Manual
administration.fm
Corporate Phonebook: Directory Settings
3.9.2.3 Phone Canonical Settings
For contact data retrieval from the directory server, upon arrival of a call, the remote telephone
number is converted according to the canonical dial settings (see also section 3.6.1, “Canonical
Dialing Configuration”). The format of the resulting number should match the format the num-
bers are stored in the directory server. It is recommended to convert the numbers to fully qual-
ified format, i.e. adding country and area code to the subscriber number. This way it is ensured
that the number used for lookup is unique.
Below is an example of settings for a company in Munich.
Administration via WBM
Local functions > Locality > Canonical dial settings
|
--- Administration
|
--- Local Functions
|
--- Locality
|
--- Canonical dial settings
|--- Local country code
|--- National prefix digit
|--- Local national code
|--- Minimum local number length
|--- Local enterprise node
|--- PSTN access code
|--- International access code
|--- Operator code
|--- Emergency number
|--- Inital extension digits
Canonical dial settings
Local country code
National prefix digit
Local national code
89
0
Minimum local number length
5
Local enterprise node
PSTN access code
0
8008
International access code
00
Submit
Reset
49
Operator codes
Emergency numbers
Initial extension digits
1,2,3,4,5,6,7,8,9

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English