Siemens HiPath 3000 - Handset Battery Insertion

inbetriebnahme.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
2-1
Startup
Prerequisites
2Startup
2.1 Prerequisites
The advance acts as an endpoint client on an IP telephony network, and has the following net-
work requirements:
• An Ethernet connection to a LAN
• A HiPath Communications System: HiPath 3000, HiPath 4000, OpenScape Office or
OpenScape Business.
• Usage of Voice VLANs is recommended.
• An FTP Server for file transfer, e. g. firmware, configuration data, application software
• A Dynamic Host Configuration Protocol (DHCP) server (recommended).
See also: http://wiki.siemens-enterprise.com/wiki/IEEE_802.1x.
7
Only use switches in the LAN to which the OpenStage phone is connected. An
operation at hubs can cause serious malfunctions in the hub and in the whole
network.