EasyManua.ls Logo

Siemens HiPath 3000 - Appendix; Troubleshooting Common Handset Errors

Siemens HiPath 3000
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
administration.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
3-119
Administration
Diagnostics
• Lost packets (per 1000 packets): When the number of lost packets exceeds this maxi-
mum value during the observation interval, a report is created.
Default: 10.
• Consecutive lost packets: When the number of lost packets following one another ex-
ceeds this maximum value during the observation interval, a report is created.
Default: 2.
• Consecutive good packets: When the number of good packets following one another falls
below this minimum value, a report is created.
Default: 8.
Compressing codecs:
The following threshold values apply to compressing codecs.
• Lost packets (per 1000 packets): When the number of lost packets exceeds this maxi-
mum value during the observation interval, a report is created.
Default: 10.
• Consecutive lost packets: When the number of lost packets following one another ex-
ceeds this maximum value during the observation interval, a report is created.
Default: 2.
• Consecutive good packets: When the number of good packets following one another falls
below this minimum value, a report is created.
Default: 8.
General:
• Resend last report: If checked, the previous report is sent once again on pressing Sub-
mit. By default, this is unchecked.

Table of Contents

Other manuals for Siemens HiPath 3000

Related product manuals