Siemens Hipath 5000 - Page 29

Administration
29
Step by Step
H.225 S-Port Base
For detailed information see  Page 77.
Switch to the administration area and choose
"Configuration"
 Page 21.
>
: Select and confirm.
> : Select and confirm.
o Enter the port number (to edit see  Page 106).
: Confirm.
The change is displayed.
Cert. Check Base
For detailed information see  Page 70.
Switch to the administration area and choose
"Configuration"
 Page 21.
>
: Select and confirm.
> : Select and confirm.
: Confirm,
or
> : Select and confirm.
The change is displayed.
Codec
For detailed information see  Page 70.
Switch to the administration area and choose
"Configuration"
 Page 21.
>
: Select and confirm.
: Confirm.
: Confirm.
or
> : Select and confirm.
or
> : Select and confirm.
The change is displayed.
02=System? >
09=H225:S-Port Base? >
02=System? >
10=Cert. Check Base? >
Off? >
On? >
03=Speech? >
01=Codec? >
>
>
>