Siemens Hipath 5000 - Page 35

Administration
35
Step by Step
Line Status
For detailed information see  Page 82.
Switch to the administration area and choose
"Diagnostics"
 Page 21.
>
: Select and confirm.
: Confirm.
or
>
: Select and confirm.
The change is displayed.
Self Labeling Key Test
For detailed information see  Page 88.
Switch to the administration area and choose
"Diagnostics"
 Page 21.
>
: Select and confirm.
Display test is running.
: Select and confirm.
Display test finished.
08=Line test? >
Off? >
On? >
The Self Labeling Key (SLK) test is only
executable for optiPoint
420 workpoints.
09=SLK test? >
Press tick to stop it >