Alphabetical Reference
70
Application Version
• Displays the version of the telephone software. It contains information
about the functional range of the optiPoint
410/420 and may change if
the telephone software is updated (
 Application File Name).
 Page 31  Page 54
Asset Identity
• This number displays information about the  Properties of the
Telephone Models of your optiPoint 410/420.
 Page 54
Audio Loop Test
• The test activates the microphone and the loudspeaker in the handset.
• You can check these components by speaking and listening.
 Page 27
Cancel Mobility Password
• If the subscriber number of the "guest telephone" was not logged off,
this can be done on the "home telephone" after entering this password.
• Valid values: Alphanumeric
• Minimum length: 6 (for more information, see  Password Functions)
• Maximum length: 20
 Page 65
Certificate Check
• This entry is only available in the local telephone menu if TLS has been
selected for
 Transport Base/Transport mode.
• CA certificates are transmitted with  DLS.
• The default setting is "Off".
 Page 29  Page 65
Clear Screenlock Password
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• This resets the user password.
 Page 54
Clear User Data
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• This function allows you to delete all the entries made by the user on
the optiPoint
410/420.
 Page 55
Codec
• You can select the audio transfer principle here that is to be used.
To Next Page
Loading...
