Alphabetical Reference
78
HTTPs
• Enter the  Port number for communication with the HTTPS server
(HTTP with SSL encryption).
 Page 66
International Dial Prefix
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• Specify the number that must be prefixed for dialing an international
telephone number, e.g. "00".
• Canonical format  Page 97.
• Default value  Page 109.
 Page 56
IP Routing
• To have constant access to network subscribers in other domains, you
can enter a total of two more network destinations in addition to the
 Default Route.
•An  IP Address of the domain and gateway and a  Subnet Mask
must be entered for each further domain you wish to use.
• Default values  Page 109.
 Page 62
Java Gateway
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
•If a  WAP server is available, enter the  Port number for
communication with this server.
• Default value  Page 109.
 Page 66
Jitter Buffer
• Select the duration of the interim storage here (number of data
packets) that changes the effect of the
 Jitter.
• The more stable the network connection, the shorter the selected
buffer time (less voice delay).
• Depending on the frequency at which the data packets are sent by the
terminal devices (e.g. 20 ms or 120 ms), this setting has a completely
different effect.
• Default value  Page 109.
Short 2 packets
Medium 4 packets
Long 6 packets
To Next Page
Loading...
