Siemens Hipath 5000 - Forwarding Calls on Trunks

Step by Step
Making calls in the team/executive/secretary configuration
148
Forwarding calls on trunks
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
v Open the Program/Service menu Æ page 42.
Confirm.
Select and confirm the option shown.
S Press the required line key.
or
j Enter the required trunk number.
or
S If available. Press the "CFW MULAP" key.
(You have programmed a key with the incomplete "CFW
MULAP" function, excluding the call forwarding type
and destination Æ page 91.)
Confirm
or
select and confirm the option shown
or
select and confirm the option shown.
or
1 or 2 or 3 Enter the code.
j Enter the destination phone number.
Confirm.
or
S If available. Press the "CFW MULAP" key. (You have pro-
grammed the "CFW MULAP" key with the call forward-
ing type and destination, Æ page 91.)
Destinations g
Forward MULAP on
1=all calls
2=external calls only
3=internal calls only