Siemens Hipath 5000 - Controlling Relays (Only for Hipath 3000)

Step by Step
Special functions in the LAN
160
Controlling relays
(only for HiPath 3000)
If this feature is configured (contact your service person-
nel), you can also control relays Æ page 140 in other
HiPath 3000 communications platforms.
c Open the idle menu Æ page 30.
Select and confirm the option shown.
j Enter the (DISA) station number of the HiPath 3000
where you wish to control the relay.
i or # Confirm your entry.
j Enter the (DISA) station number of the phone you wish
to use to control the relay.
i or # Confirm your entry.
Confirm
or
select and confirm the option shown.
1...4 Enter the relay.
DISA intern
Control Relay On
Control Relay Off