Siemens Hipath 5000 - Enhanced Phone Functions; Answering Calls; Accepting Calls Via the Headset; Answering a Call for Another Phone

Step by Step
Enhanced phone functions
58
Enhanced phone functions
Answering calls
Accepting calls via the Headset
Prerequisite: You have connected a headset or are
using a Bluetooth headset Æ page 190.
o The LED flashes when a call is received.
Press the key shown.
or
Confirm.
if nec.
X Set the call volume.
Pay attention to the notes on voice encryption
Æ page 113.
Ending a call
o Press the key shown. The LED goes out.
or
s Press the key shown. The LED goes out.
Answering a call for another phone
You hear another telephone ring.
T Press the flashing key.
or
v Open the Program/Service menu Æ page 42.
Select and confirm the option shown
[1]
.
Select and confirm the option shown.
Confirm.
Make sure your headset port is set up properly
Æ page 171.
Answer
Calls g
[1] "Differing display view in a HiPath 4000 environment"
Æ page 196
Pickup - directed
Answer