Step by Step
Enhanced phone functions
78
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your ser-
vice personnel), you can use a speaker call (announce-
ment, Æ page 151) to announce a call in progress to a
group of users Æ page 67.
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
Prerequisite: You are conducting a call.
Confirm. The other party is placed on hold.
v Open the Program/Service menu Æ page 42.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter the group’s station number.
[ Announce the call.
When a member of the group accepts the call
Æ page 59, you are connected to this party.
\ Replace the handset.
or
Select and confirm the option shown
[1]
.
Consultation
Calls g
Speaker call
Transfer
[1] "Differing display view in a HiPath 4000 environment" Æ page 196
If the connection between the two other parties is
not established within 45 seconds, the call from
the first part returns to you (recall).
To Next Page
Loading...
