Siemens Hipath 5000 - Programming a Procedure Key

Programming sensor keys
95
Step by Step
Programming a procedure key
Numbers and functions which require further input, i.e.
which contain several operating steps, can be saved on
a key on your telephone.
S Press and hold the required sensor key.
Select and confirm the option shown.
or
v Open the Program/Service menu Æ page 42.
Select and confirm the option shown.
S Press the required sensor key.
If the key is already in use, the programmed phone
number appears on the screen.
Confirm.
Select and confirm the option shown.
Confirm.
j Enter procedure. Example:
*67 Code for associated dialing.
231 Number of the phone for which the call should be
made.
01234 the number to be called.
if nec.
S Press "Pause" to enter pauses (a "P" appears on the dis-
play).
Confirm.
or If you make a mistake:
Select and confirm the option shown.
This deletes all entered digits.
if nec.
Select and confirm the option shown Æ page 98.
Confirm.
or
Select and confirm the option shown.
Assign functionality
Prog. feature key
Change key
More features g
Procedure key
Save
previous
Key label
Exit
Another key