Siemens Hipath 5000 - Setting Headset Port Use

Individual phone configuration
171
Step by Step
Setting headset port use
Here you set whether you are using a wired or cordless
DECT headset.
z
You can also configure this setting via the Web interface
Æ page 199.
v Press the key shown until the "Settings" tab is active.
Confirm.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select
From the following setting
[1]
select and confirm the op-
tion shown in the context menu.
• Wired headset
• Wireless headset
• Conference phone
b Select the "Options" entry.
Select and confirm the option shown.
or
h Press the key shown.
Confirm.
User
Audio
Settings
Headset port
Wired headset
[1] The phone displays the current setting.
Save & exit
Save