Siemens Hipath 5000 - Configuring Repdial Keys

Programming sensor keys
97
Step by Step
Configuring repdial keys
You can also program internal and external station num-
bers on the second level. The LED function is not avail-
able for internal station numbers on the second level.
To program the second level, you must program a "Shift"
key Æ page 91.
See also Æ page 24.
S Press and hold the required sensor key.
Select and confirm the option shown.
or
v Open the Program/Service menu Æ page 42.
Select and confirm the option shown.
S Press the required sensor key.
If the key is already in use, the programmed phone
number appears on the screen.
if nec.
Select and confirm to save the phone number on the
second level.
Confirm.
Confirm.
Confirm.
j Enter the station number.
or
Select and confirm the option shown.
j Enter the speed-dial number (the speed-dial numbers
correspond to the system phonebook Æ page 38).
if nec.
Select and confirm the option shown Æ page 98.
Confirm.
or
Select and confirm the option shown.
Assign functionality
Prog. feature key
Next layer
Change key
Destinations g
Repdial key
Speed dial
Key label
Exit
Another key