Siemens Hipath 5000 - Restoring User Data; Restoring All User Data

Data backup to USB memory stick
193
Step by Step
Restoring user data
Selecting a backup
Prerequisite: The USB memory stick is correctly
plugged in Æ page 191 and you have created at least
one data backup Æ page 192.
v Press the key shown until the "Settings" tab is active.
Confirm.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the backup you want.
Restoring all user data
This operation overwrites all current user settings
Æ page 191 - irrespective of the status set Æ page 194
- with the selected backup.
Prerequisite: You have selected a backup and opened
the context menu Æ page 193.
Confirm the option shown in the context menu.
The "Restore {1}:" page is displayed.
W Select and confirm the entry "Backup password".
j Enter the password set during the backup.
Select and confirm the option shown to start the data
transfer.
User
Phone
Backup/Restore
17.08.07 14:42 3770 g
This can result in the loss of settings made since
the last backup.
Restore
Restore all g