Siemens Hipath 5000 - Individual Phone Configuration; Adjusting Display Settings; Adjusting the Display to a Comfortable Reading Angle; Screensaver

Step by Step
Individual phone configuration
162
Individual phone configuration
Adjusting display settings
Adjusting the display to a comfortable rea-
ding angle
You can swivel the display unit. Adjust the display unit
so that you can clearly read the screen.
Screensaver
Activate a screensaver for the telephone idle state.
z
You can also configure this setting via the Web
interfaceÆ page 199.
Activating the screensaver
Prerequisite: Your service personnel have loaded pictu-
res to the OpenStage.
v Press the key shown until the "Settings" tab is active.
Confirm.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the "Enabled" entry.
The phone displays the current setting.
Confirm.
Select and confirm the option shown in the context me-
nu.
b Select the "Options" entry.
Select and confirm the option shown.
or
h Press the key shown.
Confirm.
User
Phone
Screensaver
No g
Yes
Save & exit
Save