Siemens Hipath 5000 - Recording a Call

Enhanced phone functions
77
Step by Step
Recording a call
If configured (contact your service personnel), you can
record an ongoing call.
Prerequisite: You are on a call, the "Recording" key is
configured Æ page 91.
S Press the "Recording" key. The LED lights up.
You and the other party hear an acoustic announce-
ment, indicating that recording has started, and an
acoustic signal is emitted approx. every 15 seconds dur-
ing the entire recording session.
Stopping recording
R Press the illuminated "Recording" key. The LED goes
out.
Listening to a recording
Playback of the recording depends on the voice record-
ing system used (see the associated user guide).
During recording, it is not possible to add further
call parties.