Siemens Hipath 5000 - Using a Bluetooth Headset; Testing a Bluetooth Headset

Step by Step
Bluetooth
190
Using a Bluetooth headset
You can use any commercial Bluetooth headset with
your OpenStage 60/60 G/80/80 G. You can connect an
approved Bluetooth headset to your OpenStage 60/
60 G/80/80 G. Ask your service personnel about ap-
proved headset types.
Prepare your Bluetooth headset for connection with
your OpenStage by following the instructions in the rel-
evant user manual.
Proceed as following to prepare your OpenStage:
• Activate the Bluetooth function Æ page 175.
• Enter the headset in the linking list
[1]
Æ page 178.
• Establish the Bluetooth connection Æ page 177.
Testing a Bluetooth headset
Prerequisite: OpenStage and the Bluetooth headset
are connected (see procedure above).
o Press the key shown.
Z You hear the on-hook signal.
j Enter the station number.
The connection is established as soon as your input is
complete.
if nec.
X Set the call volume.
You are recommended not to activate the speak-
erphone feature (see Æ page 49) when using a
Bluetooth headset because depending on head-
set and environment, this can lead to reduced
speech quality.
[1] only necessary the first time